These are the latest Alloy Wheel repair Machines with a special attachment that will allow you to replicate a perfect Diamond Cut Effect to a factory finish. Leasing can also be arranged through Shire Leasing. 1 X 80 grit disk will be enough to remove any damage and corrosion from the whole wheel. I also know of the latest solution and process that will etch the alloy and allow you to use a quick drying clear coat and it will adhere better than any self etch clear and dry in 10 mins or less. As you will see in the photos it has been made out of Billet aluminium and Marine grade stainless steel.The Diamond cut tooling is also built to last giving you that perfect factory finish with the sheen required not just scratches put in with scotch. Also in the photos you will see a few wheels that have been repaired to a very high standard including a BMW M3 alloy know to be hard even for a lathe to plot and cut without issues.
Nissan have the highest standards compared to many other manufactures including Mercedes, Aston and Bmw to name a few and they were not passing many refurbished wheels from a Alloy wheel repair company's with a lathe because the cut was to deep but this machine managed it with ease and has been approved by Nissan. Any depth of cut can be achieved.
Machine can repair wheels up to 24 with tyres still on. Unlike a lathe this machine can also produce a highly polished finish a great up sell opportunity.With this machine it is also possible to do a 95% invisible SPOT REPAIR on a diamond cut wheel once shown. Again very easy once shown and explained correctly! So with this machine, hints, tips and the etch solution you will be miles ahead of you competitors. If collected I will show the purchaser exactly how it all works. Dimensions 30" X 30" X 28 high.
This includes the bead breaker arm. Everything is included to repair wheels except for the sanding disks.
Also a 3 DA with a 2.5 mm orbit would be an advantage for those very intricate spokes that are starting to come out that lathes can not cut. Disks required are 80,180,320,500, Trizackt 1000 and 3000. These are the only consumables you will require on top of the machine. Machine is 240 Volt and has a low amp start up to stop tripping issues in mobile vans, every issue has been thought about a covered. As you will see in the photos there is a VW Gti wheel that is was badly damaged.The whole front face was ground back to remove all damage and corrosion and then brought back to a polished finish with a diamond cut effect applied. (40 minutes from start to finish). All this was carried out by a young trainee on this machine with no previous experience in a very short time. The last photos are of an M3 alloy of which a customer repaired (This was also his first attempt). For any more info or to arrange a demonstration. THERE IS NO VIDEO FOOTAGE AS A LIVE DEMO NEEDS TO BE SEEN TO APPRECIATE THIS MACHINES FULL POTENTIAL. It does a diamond cut perfectly unlike other machines. The item "Alloy Wheel Repair Machine With Diamond Cut (smart Repair)Alloy wheel Refurb" is in sale since Saturday, April 8, 2017. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Paints & Supplies\Other Body Paint & Supplies".
The seller is "polishedfabrications2014" and is located in Gloucester. This item can be shipped to United Kingdom.