G6 Engine Carbon Cleaning Machine HHO system Hydrogen mobile unit DPF EGR TURBO

We are an independent UK based engine carbon cleaning company. We specialise in manufacturing & supplying the public and automotive sector with our custom built carbon cleaning range. All our machines are tested rigorously to ensure they do the job right first time round. If your looking for a carbon cleaning machine then you have come to the right place. We have a range of bespoke machines that will suit beginners or professionals. All our machines are built with the highest attention to detail and care. We pride ourselves in supplying the market with affordable and mobile machines. If your looking to setup a new business venture or just to use at home, we will have the right machine for you! WHY IS HYDROGEN SO EFFECTIVE AT CLEANING MY ENGINE? Hydrogen is highly flammable much more so than petrol so when your engine ignites, the hydrogen explosion ignites the petrol with much better results (cleaner, less waste and fewer emissions) than it would otherwise have done. The hydrogen burns at a higher rate than fuel. Because the hydrogen is burning faster along with fuel the engine will reach optimal temperature at idle. While this cycle is in process, the hydrogen is splitting the carbon atom in half, so basically stripping the carbon from the internal walls of the engine and parts. This includes the combustion chambers, exhaust ports, cats, lambda sensors, inlet valves, fuel injectors and fuel pressure regulators, Turbos, EGR and DPF. The hydrogen´s higher burn temperature and explosive force is such that it cleans the soot that collects in the engine and with a cleaner engine you get better mileage, quieter engine, better fuel economy, better response, and to recover lost BHP over the years. A carbon clean is a preventative service and whilst we recommend a carbon clean alongside your annual service, we also recommend for it to be completed when and where possible.

The build-up of carbon is the result of a lot of engine and turbo failures. This is the main cause of breakdowns.

If you take care of your car it takes care of you! Because carbon cleaning is well known in the UK and more people are aware of its benefits to their vehicle. You can take advantage of it. Not all garages have machines, and you would think the first place people would go is to a garage. But carbon cleaning machines are mobile it can be done anywhere! And that is taking into consideration having 2 days off in the week. Now that's not bad for one carbon clean a day! Now put that into perspective, once you have your customer base (you will have repeat business from the same customers time after time) and you work 7-8 hours a day, over the month you can earn quite a fair bit. And the best part of it all is our machine does all the hard work for you! You can just sit back and let the machine do its thing! The income potential is great, but our service doesn't stop there.

We also provide useful business advice and how you can make the most of your machine and new business. Just give us a shout! This is our small but mighty custom made mobile carbon cleaner. This will clean up to 17,000cc engines.

Its a good size unit suited for mobile operations and workshops where space is tight. Very light in weight but also a very powerful machine! If your're thinking about getting into the carbon cleaning business then this is the machine to do it.

Don't be put off with its size. This has state of the art custom built internals. With upgraded circuit boards for higher voltage and uprated pressure vessels, which are made in Germany with powerful wet cells for the production of hydrogen. It has a range of safety features such as cross polarity protection, over heating detection, automatic shutdown and fuse protection.

The G6 machine has been CAD designed for maximum airflow which cools down the hydrogen tank. Meaning it can run for longer periods of time whilst producing pure hydrogen.

It also has very low power consumption due to its efficiency of its cells and upgraded circuit boards. The machine also has cooling fans built in, which is constantly on when the machine is running. This helps with the ventilation and cooling the highly modified circuits boards. The main frame is light weight steel, which is then powder coated.

This light weight steel also helps with cooling to how it was designed. All in all this beautifully CAD designed machine has been built for the pure purpose of creating the hydrogen for cleaning carbon out of vehicles. This machine is a marvel and you will get nothing but smiling customers year after year!

Along with our machine you will also need our specially blended KoH crystal mix, this is what produces the purest hydrogen. Our crystals are like no other. It has taken us 2 years just to develop this blend alone! But you have to remember the KoH crystals are the most important part of any carbon cleaning machine. We use an electrolyte like Koh for our machines because its the best way to create the most purest hydrogen available.

We also use a wet cell system compared to other dry cell systems out there. A wet cell system is a high energy density system. Dry cell systems trap electrolytes and restrict them from flowing freely, which in turn are more easily damaged.

They will need more regular maintenance and parts need to be cleaned regularly. Whereas wet cell system likes ours are more robust, they do not need regular maintenance like a dry cell system. Wet cells can tolerant pressures and use over time. So they will produce pure hydrogen time after time, superior deep cycle life. KoH Crystals (FREE bottle supplied in package) - These crystals will need to be mixed in distilled water to create your 1 litre solution needed in the tank.

Soon as you add the crystals into the distilled water, they will dissolve instantly. This solution is needed to create pure hydrogen to carbon clean. Each tank full will do 150 carbon cleans! NOTE: Do not use tap water as this can cause the cells to fur up and will limit hydrogen production. Its a very easy to use machine!

It runs on 240v mains power or can be used on a 1000 watt inverter and then connected to the car battery. Simply start the car (engine will need to warm - normal operating temperature) and connect the hose to the air intake.

You may need to undo a cir-clip or band in order for the hose to slip into the air intake. After approx 30-60mins (Vehicle engine size dependant) the carbon clean cycle is completed.

You will notice during the cleaning cycle that the engine will quieten down and when you take it for a test drive it will have restored some BHP. But overall you will have better MPG, emissions, better acceleration, smoother ride and a healthy running engine! YOU CAN NOW SPREAD THE COST WITH FINANCE!!!! - Ask for more details! Power consumption (kw/H): 0.43.

Max pressure: 0.3-0.5 Pa. Max water consumption: 0.03ml per hour. What is the special blend of KOH crystals made of: Potassium hydroxide (KOh) is main ingredient but it has been carefully blended with other ingredients to make our famous super powerful mix. Has taken us 2 years just to get this mix right! You will not be disappointed with its performance.

We will be with you every step of the way, if its either setting up or just a general question your customer has asked! Power Cable (UK plug supplied unless requested). 1x feed gun with pipe work. 1 x Bottle of Koh Crystals.

PLEASE ALLOW 3-5 DAYS TO RECEIVE YOUR MACHINE, MOST OF THE TIME YOU WILL GET WITHIN 2 DAYS. BUT SOMETIMES THERE ARE DELAYS DUE TO BUSY PERIODS OF THE PRODUCTION LINE. We will do everything to solve any problem. Your satisfaction is our priority. A STARTED A NEW BUSINESS WITH HELP FROM CARBON-K!!

Amazing results from the cleans i've done! We will make every effort to ensure that our cooperation has been successful, for you to be satisfied with our products and services. We are here to help you! We specialise in manufacturing, designing and supplying the public and automotive sector with our custom built carbon cleaning range. Not only do we deliver within the UK but also worldwide.

We have a big network of partners all around the globe! The item "G6 Engine Carbon Cleaning Machine HHO system Hydrogen mobile unit DPF EGR TURBO" is in sale since Saturday, May 4, 2019.

This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Workshop Equipment & Supplies\Other Workshop Equipment". The seller is "carbonkings01" and is located in Birmingham. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam, Cayman islands.

Brand: Carbon-K
Unit Type: Unit
Manufacturer Part Number: G6-CRB-CLN
Modified Item: Yes
Type: HHO Carbon Cleaning
Country/Region of Manufacture: United Kingdom
Unit Quantity: 1