ADR compliant, legal in all states and territories. Individuals, hire companies and government bodies. Plug into your interior front accessory socket, run the main loom through vehicle via boot, rear door (utes & dual cabs) under tailgate etc. To the rear of your vehicle, plug to car, socket to trailer or caravan etc.
Use common sense to ensure there is not excess cable overhang. The Brake Controller unit can be placed in the console area, as long as it is within reach of the driver. This unit does not need to be mounted to function correctly. Do not run other accessories from the same plug and/or circuit, whilst Portable Brake Controller is in use.
A detailed, robust assembly - this unit does not need to be mounted - no pendulums and no levelling in any way required - made tough to last. Rated up to two axle (4 brakes), caravans, trailers, horse floats etc. A unique high quality assembly.
Bracketed wiring loom to prevent damage. 5mm Aussie made main loom.
7 core plug tips soldered. Our system is unique, our assembly process takes substantially more time and effort than other sellers, we offer a no compromise approach to product safety and quality. Included is a specifically manufactured bracket to stabilise the wiring loom from controller to prevent twisting, pulling and degeneration. The Controller: Sturdy steel cradle Hayman Reese Brake Controller that requires no levelling or mounting and is simple to operate other marketed portable kits (Tekonsha, Primus etc) require east/west cabin mounting and/or leveling to function correctly insist on installation instructions if you are told otherwise!
The Hayman Reese Guardian Brake Controller from one of the biggest names in the business - strong steel cradle construction, durable, a convenient non intrusive shape and size, compact and reliable, simple to operate and understand and gives you greater control over your braking, with a large easy to read DIGITAL display and push-button controls. Easily accessible push buttons for controlling output and sync settings. Easy-to-read digital display communicates brake power output, sync setting and error codes.Advanced internal circuit protection prevents damage. Operates in any position, no levelling required. No electrician, assembly or installation required. Can be used for permanent installation. Powers up via 12v accessory/cigarette socket (Do not run other accessories from the same plug/circuit).
6 metre heavy duty twin core main loom - split tubing not used, too large in diameter and experience has been that it will damage door rubbers etc. 4mm heavy duty 7 core from plug to plug.
Loom from controller is bracketed to ensure absolute reliability, wiring will not twist, separate or break away from controller circuit board. All connections soldered with heat shrink protection no crimping or insulation tape used stronger and prevents corrosion. All joins and 7 core tips inside plug and sockets are soldered for strong and reliable connections. Dual wall heat shrink used to secure connections, plugs and sockets no insulation tape or cheap methods used adds strength and prevents water intrusion. 7 pin flat or round, 12 pin plug/sockets in any combination (7 pin small available for Western Australia etc).All units safety tested prior to dispatch. Compliant with all state and national regulations. Free check and test service you send it, we check it! Please message Dave if you have any questions response is typically within 1 hour...... Q: Who are Portable Brake Controllers Australia?
A: We are a bona fide business, registered for GST and with ASIC. We are not'back yarders' and we are the longest standing portable brake supplier in Australia.Q: Can this unit be cabin mounted. Q: What are the power specifications for this assembly? A: Depending on your accessory socket output, the following specifications apply.
Q: Does this come with instructions? A: Yes, instructions for the controller unit, as well as operational instructions for portable use are supplied. Q: Why should I choose the Hayman Reese unit? There is no complicated set up programming and the unit can be used in any position as long as it is within reach of the driver.
All other portable kits on the market require directional mounting and/or levelling. Q: Other kits use split tubing around main loom? A: The split tubing is too thick to use through boot lid, tailgate etc. It will cause the opposite effect to what it trying to prevent (damage to the wiring) and will cause a crush effect on main loom and may also damage door/boot lid rubbers etc.
Q: Can I order any plug/socket type configuration? A: Yes, you can add a note/message along with your order, write it there and we will make sure it's right. Q: Are your units tested? A: We test every unit prior to despatch. Q: Where are you located and do you have distributors?
A: Located in Geelong, we generally supply direct although we do have distributors in most states. Q: How long do orders take? A: Dispatched via Australia Post, overnight to major centres, other locations can be a few days. Contact Dave if you have questions. Q: Are Electric over hydraulic portable kits available?
A: Yes, although this is depends upon what type of electric over hydraulic system is fitted please contact Dave for more info. The item "PORTABLE ELECTRIC TRAILER BRAKE CONTROLLER" is in sale since Wednesday, May 30, 2018. This item is in the category "Vehicle Parts & Accessories\Trailer Parts". The seller is "portablebrakecontrollersaustralia" and is located in Ocean Grove, VIC.
This item can be shipped worldwide.