Vehicle Parts Accessories

Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455


Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455
Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455
Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455
Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455
Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455

Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455    Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455

Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455. 1 Parts & Accessories Supplier for VW Camper Vans and Beetles. We stock parts for these vehicles. Same day dispatch for orders placed before 5:30PM (Mon-Fri). Great value Dynamat Bulk Pack.

Contains nine 45x81cm sheets of Dynamat Xtreme, giving 3.3m² coverage. Dynamat is a thin, flexible, easy to cut and mould sheet, that stops noise causing resonance and vibration by using visco-elasticity that promotes vibro-acoustic energy conversion. In short, this is a great quality sound proofing agent! The Dynamat Bulk kit contains nine 45x81cm sheets of Dynamat Xtreme giving 3.3m² coverage.

You can apply Dynamat in patches (25-50% area coverage) to keep a specific panel from resonating or you can apply it over an entire area (such as the floor, doors, or trunk) to create a sound barrier and vibrational damper. Even a small amount of Dynamat can cause a profound noise reduction. For example, applying Dynamat to the doors of your vehicle can reduce road noise from 3-6dB. Complete coverage of an average vehicle can reduce road noise 9, 12 even as much as 18dB!

We recommend applying Dynamat to any surface you can easily reach such as the doors, inner rear panels, bulkheads, floors, inner roof, nose panel or under the bonnet. Installing Dynamat requires : razor knife or scissors, roller , rags and a solvent- based cleaner (rubbing alcohol also works). Dynamat Xtreme is a patented, lightweight elastomeric butyl and aluminum constrained-layer vibrational damper.

Dynamat Xtreme conforms and fuses easily to sheet metal and other hard substrates. Material performance is optimized for temperature ranges between 14°F and 140°F (- 10°C to +60°C). Material can withstand temperature extremes between -65°F and +300°F (-54°C to +149°C) and is highly resistant to aging. The acoustic loss factor "n" is used as a measure of a material's ability to damp structure-borne sound by stating how much vibrational energy (in steel sheets for instance) is converted to heat rather than sound. For constructions containing several layers of damping material, the combined loss factor "n comb" is used.

The theoretical maximum loss factor is 1 (no vibration). An undamped 1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz. Multiple layers of Dynamat Xtreme improve sound damping even more. Dynamat Xtreme can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary. Black butyl based core with 4 mil aluminum constrain layer, craft paper release liner. 14°F to+140°F (-10°C to +60°C). 65°F to +300°F (-54°C to +149°C). Resistant to water and mineral oils. Adhesive Peel Strength (Bond strength). 42.6 lbs/inch (74.8N/cm) on cold steel. Store material at room temperature for best application. Number of sheets in stack: 50 maximum.

Material must be stored horizontally in its wrapping. What Models Does This Fit? Air-Cooled Petrol (1946 - 1980) : 1200cc, 1300cc, 1500cc, 1600cc.

Air-Cooled Petrol (1950 - 1967) : 1200cc, 1500cc. Air-Cooled Petrol (1967 - 1979) : 1600cc, 1700cc, 1800cc, 2000cc. Water-Cooled & Air-Cooled Petrol (1979 - 1992) : 1600cc, 1700cc, 1900cc, 2000cc, 2100cc. Water-Cooled & Air-Cooled Diesel (1979 - 1992) : 1600cc, 1700cc, 1900cc, 2000cc, 2100cc.

Water-Cooled Petrol (1990 - 2003) : 1800cc, 1900cc, 2000cc, 2400cc, 2500cc, 2800cc. Water-Cooled Diesel (1990 - 2003) : 1800cc, 1900cc, 2000cc, 2400cc, 2500cc, 2800cc. Water-Cooled Petrol (2003 - 2013) : 1900cc, 2000cc, 2500cc, 3200cc. Water-Cooled Diesel (2003 - 2013) : 1900cc, 2000cc, 2500cc, 3200cc. Water-Cooled Diesel (2015 - 2021) : 2000cc. Free of charge to all UK addresses.

Sent on a 24 hour service to UK addresses via DPD. Fully tracked courier service with mobile text alerts and a 1 hour time slot. Price is calculated based upon the destination and dimensions of your order. Place your order before 5:30PM and we will dispatch your order on the same day it was placed.

We are happy for you to come and collect your order from our shop in Odiham, Hampshire. We understand that sometimes customers order the wrong parts.

We also appreciate that occasionally some parts ordered may be surplus to requirements. Customers who order the wrong parts. Customers who do not require the parts. Damaged, faulty and incorrect parts delivered.

Incorrect Parts Ordered, Goods not Required. Customers must meet the cost of return carriage on correctly supplied goods.

View these items & similar. Join our newsletter for exclusive offers!

The item "Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455" is in sale since Wednesday, December 12, 2018. This item is in the category "Vehicle Parts & Accessories\In-Car Technology, GPS & Security\DIY for Speakers & Subwoofers\Insulation". The seller is "just_kampers" and is located in Hampshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  1. Country/Region of Manufacture: United Kingdom
  2. Reference OE/OEM Number: J27787
  3. Modified Item: No
  4. Non-Domestic Product: No
  5. Part Manufacturer: Dynamat
  6. Unit Quantity: 1
  7. Unit Type: Unit
  8. Brand: Dynamat
  9. Placement on Vehicle: Rear Door
  10. Features: Noise Reduction
  11. Manufacturer Part Number: DYN10455
  12. Custom Bundle: No
  13. Material: Aluminium Butyl
  14. Colour: Black
  15. MPN: DYN10455


Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455    Dynamat Xtreme Extreme Bulk Pack Car Black Noise Reduction Proofing DYN10455