Volvo Penta standard instrument panel NEW UK Stock

  

This is a Volvo Penta standard control panel white gauges. This aftermarket panel has been madew to connect directly to your origional Volvo Penta wiring loom or Volvo Penta engine wiring harness. The panel will work with all your origional equipment engine sensors and should be a simple plug and play fitting job.

The panel has beeen designed to replace all VP standard panels. Including those which do not have a key switch. Your engine will ignore any features of this panel that your origional panel does not have. The panel will not rust, will not fade and is easy to clean. All of the gauges are fully waterproof with stainless steel bezel and glass lense that will not yellow or crack in the sun. The 12v panel has a voltmeter, and a 4000 rpm tacho with hours meter. The panel has warning lights for Low oil pressure with buzzer, High water temp with buzzer and charge light. There is a key switch with the following functions ; ON, HEAT, START. These is also a waterproof toggle switch for engine off.

The panel has a short pigtail with a Volvo Penta standard male 16 way round connector. You should be able to remove the old panel and plug in the new panel. The panel should be fixed down to the bulkhead withe the fixing holes. If used outside the panel should be sealed to the bulkhead to prevent water ingress with a bathroom sealent. If you have any questions please do ask.