THESE ARE USED THROUGHOUT THE WORLD BY MOBILE MECHANICS, RECOVERY SERVICES, GARAGES, ETC. Nb: YOU need to abide by the law when using this product and when using this product it is solely the responsible of person towing vehicle. NOT TO BE USED FOR TOWING any automatics, TRANSIT VANS OR 4X4. SMALL VANS AND CARS ONLY!NB: IT IS THE CONDITION OF SALE THAT THE USE OF THIS EQUIPMENT IS BEYOND OUR CONTROL. IT IS UPTO THE USER TO ENSURE THE CORRECT, PROPER AND SAFE USE OF THIS EQUIPMENT AND ALTERATIONS SHOULD NEVER BE MADE TO THE A-FRAME. EZY TOW WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO ANY VEHICLE OR INJURIES TO ANY PERSONS DUE TO MISSUSE OR NEGLECT OF THIS EQUIPMENT. VEHICLES BEING TOWED ARE THE FULL RESPONSIBILITY OF THE DRIVER. ALWAYS CHECK THE LAW WHEN TOWING VEHICLES.
LASER CUT COMPONENTS FOR CLOSE TOLERANCES. HI TENSILE LOCK NUT FITTINGS & QUALITY DEKRA TOW HITCHES.
2.5 TONNE PULLING CAPICITY (750KG WEIGHT BEARING CAPACITY). ZINC PLATED SILVER FOR LONG LIFE AND LOVELY LOOK FINISH.NOT SPRAY PAINTED OR BY HAND WITH A BRUSH LIKE OTHERS. HI SPECS AND CLOSE TOLERANCE ENSURE RIGID UNIT FOR MAXIMUM CONTROL.
SPECIFICATION: SWL 2.5 TONNE. MANUFACTURED HERE IN THE UK. TOTAL boxed WEIGHT: 24 KGS.
ENTIRE FRAME SUPPLIED WITH LOCKING NUTS FOR COMPLETE SAFETY 5MM HEAVY DUTY THICK WALLED BOX SECTION JOINTS. HEAVY DUTY LASER CUT 8MM THICK HEADER PLATE AND COMPONENTS. CENTRE JOINING SOCKETS 2X WELDED INSIDE AND OUT FOR INCREDIBLE STRENGTH! 20MM LEG POSTS 2X WELDED INSIDE AND OUT FOR EVEN MORE STRENGTH. THESE ARE STRONG AND WILL NOT BEND unless misused.
9MM THICK ZINC PLATED CHAIN. Attach the trailer coupling on to the box head of the hitch plate and tighten nuts and bolts(avoid crushing the inner box section housing as you tighten bolts). Next tighten the nuts and bolts that connect the arms to the hitch plate enough so you still have movement, fit the ratchets to the a frame NB: The ratchet handles can be attached with handles facing forward or backwards it is your preference however we advise what gives most clearance for the front bumper. Next fit the legs into the arm sockets ensuring the chains are facing upwards and tighten nuts and bolts, insert the straps through the gap in the ratchet winders and place the A-Frame in front of the vehicle to be towed.
FITTING A FRAME TO VEHICLE. Slide the A-frame under the vehicle, place the pin (on the end of the leg) against the front of the wishbone, wrap the chain over the top of the wishbone or the hole if there is one, and back under on the inside of the A-Frame towards the front bumper of the vehicle, do same for both sides (see picture pin placed against the front of wishbone).Linking chain to the strap. Slot the chain link into the keyhole fitting of the strap so that at least 2 or more links are through and slide the chain back into slot. Work the ratchet handles to allow the straps to roll up and tension (do not tension fully just yet). Last step is to select the holes for desired width from the 10 holed cross brace on the A-Frame arms and fully tighten all 3x nuts & bolts including the slotted slider hole the hitch plate assembly.
Now lift the tow hitch coupler on to the tow ball of your car. Double check that all nuts and bolts are tight on the entire A-Frame and that everything looks right. Make sure nothing is going to rub or catch on anything under the car when the wheels turn. Once everything has been checked you can now fully tension the ratchet straps, do not over tension. VEHICLES BEING TOWED ARE THE SOLE RESPONSIBILITY OF THE DRIVER.IF YOUR TOW BALL/BAR NEEDS LOWERING IN ORDER TO USE THIS A-FRAME SAFELY TO AVOID DAMAGED TO EITHER VEHICLE THIS MUST BE DONE BEFORE ATTEMPTING TO TOW THE VEHICLE. GUIDELINE FOR TOWING WITH YOUR A-FRAME IN CORRECT MANNER. AVOID SPEED HUMPSAND TURNING SHARP. IT IS ADVISED TO USE A LIGHT BOARD ON REAR OF TOWED VEHICLE AT ALL TIMES. VEHICLE TO BE TOWED IS NOT TO EXCEED 75% WEIGHT OF TOWING VEHICLE AND SHOULD BE SMALLER IN SIZE.
Ie: DONT TRY TO TOW A VAUXHALL ASTRA WITH A FORD FIESTA. ALWAYS DRIVE IN A FORWARD MOTION WHEN PULLING AWAY FROM JUCTIONS BEFORE TURNING. IF YOU ATTEMP THIS YOU WILL DAMAGE THE A- FRAME.DO NOT : ATTACH THE CHAINS TO THE ANTI ROLL BAR, DRIVE SHAFT OR ANY PART OF THE STEERING MECHANISM AND DO NOT USEREVERSE WITH A-FRAME FITTED AS IT MAY STRETCH AND DAMAGE IT, AND ITS IS NOT DESIGNED TO WORK IN THIS MANNER. The item "EMERGENCY 2.5T CAR RECOVERY ONE MAN'A FRAME TOWING DOLLY' TRAILER TOW" is in sale since Monday, November 27, 2017. This item is in the category "Vehicle Parts & Accessories\Car Accessories\Trailers & Towing\Tow Poles". The seller is "ezytowuk_3" and is located in Tamworth. This item can be shipped to United Kingdom.